Filtrar por
Productos
Página 1 de 2
-
4118
El soporte de poliimida Kapton y el® adhesivo de silicona ofrecen una excelente resistencia térmica y excelentes propiedades de aislamiento eléctrico. Esta cinta se utiliza cuando se requiere dureza, resistencia a la perforación, resistencia extrema al calor y retardancia de llama. El rango de temperatura de funcionamiento es de -60 °C (-76 °F) a +260 °C (500 °F).
Ver producto -
4428
Polyimide backing and silicone adhesive offers outstanding thermal resistance and excellent electrical insulating properties. This tape is used where toughness, puncture resistance, extreme resistance to heat, and flame retardance are required. Operating temperature range is -60°C (-76°F) to +260°C (500°F).
Ver producto -
4429
El respaldo de poliimida extra resistente y el adhesivo de silicona ofrecen una excelente resistencia térmica y excelentes propiedades de aislamiento eléctrico. Esta cinta se utiliza cuando se requiere dureza, resistencia a la perforación, resistencia extrema al calor y retardancia de llama.
Ver producto -
4618
Inert, high strength backing and heat resistant silicone adhesive for high temperature applications. This tape resists edge fraying and rotting and is flexible and varnish absorbent. Used in applications where solvent resistance, flame retardance and abrasion resistance is required.
Ver producto -
51579
Kapton® polyimide backing and high tack acrylic adhesive offers excellent chemical and thermal resistance with excellent electrical insulating properties. This tape is used where toughness and puncture resistance are required.
Ver producto -
56228
Nomex® non-woven backing and acrylic adhesive offer outstanding thermal, chemical, solvent and moisture resistance. Thin backing provides minimum insulation build-up.
Ver producto -
AFT200C
Double coated with an aggressive pressure-sensitive acrylic adhesive, this acrylic foam tape is engineered to bond to almost any surface. Excellent resistance to solvents and temperature variances. Conforms well to curves, moves and flexes as needed on applications requiring contortion and bending characteristics.
Ver producto -
AFT450G
Double coated with an aggressive pressure-sensitive acrylic formulation, this acrylic foam tape is engineered to bond to almost any surface. Excellent resistance to solvents and temperature variances. Conforms well to curves, moves and flexes as needed on applications requiring contortion and bending characteristics.
Ver producto -
ATA200
2.0 mil glass-filled acrylic pressure-sensitive adhesive applied to an easy release treated densified kraft paper liner. Offers good shear strength with excellent adhesion properties across a broad range of temperatures and resistance to ultra-violet (UV). Adheres well to a variety of surfaces. Product is not repulpable.
Ver producto -
ATA400
Adhesivo acrílico sensible a la presión relleno de vidrio de 4.0 milésimas de pulgada aplicado a un revestimiento de papel kraft densificado tratado de fácil liberación. Ofrece buena resistencia al cizallamiento con excelentes propiedades de adhesión en una amplia gama de temperaturas y resistencia a los rayos ultravioleta (UV). Se adhiere bien a una variedad de superficies. El producto no es repulpable.
Ver producto -
FM28
A pressure-sensitive masking tape designed for use in extreme high temperature conditions. The polyimide backing combined with backing combined with thermosetting silicone adhesive provides superior flame and chemical resistance. Can withstand exposure to temperatures up to and in excess of 400°F (204°C).
Ver producto -
FM38
Polyimide backing and silicone adhesive with Anti-Static Polymer Coating. This tape is used where low static, toughness, puncture resistance, extreme resistance to heat, and flame retardant properties are required. This product generates less than 50 volts discharge as it is being dispensed.
Ver producto