Filtrar por
Productos
Página 5 de 8
-
AM
AM (AquaMask) is an aqua colored, conformable, saturated, crepe paper masking tape with pressure-sensitive rubber adhesive. Good adhesion and holding properties. Clean, easy removal. Resists paint flaking and wet sanding. Compatible with both water and solvent-based paints. UV-resistant up to three (3) days. Temperature resistant up to 225°F (107°C) for...
Ver producto -
BD24
A medium strength, crepe paper, pressure-sensitive tape with excellent mass to mass adhesion.
Ver producto -
DCP056A
Polyester (PET) film coated on both sides with pressure-sensitive acrylic adhesive. Provides excellent adhesion to a variety of surfaces, as well as excellent resistance to oils, some plasticizers, ultraviolet (UV) light, and wide range in temperature. Aggressive acrylic adhesive system bonds well over a wide range of environmental conditions.
Ver producto -
DCT080A
Tissue paper coated on both sides with an aggressive, pressure-sensitive, solvent acrylic adhesive. Provides excellent adhesion to a variety of surfaces as well as excellent resistance to oils, some plasticizers, ultraviolet light (UV) and wide range in temperature.
Ver producto -
DCT085A
Tissue paper coated on both sides with an aggressive, pressure-sensitive, solvent acrylic adhesive. Provides excellent adhesion to a variety of surfaces as well as excellent resistance to oils, some plasticizers, ultraviolet light (UV) and wide range in temperature.
Ver producto -
FM28
A pressure-sensitive masking tape designed for use in extreme high temperature conditions. The polyimide backing combined with backing combined with thermosetting silicone adhesive provides superior flame and chemical resistance. Can withstand exposure to temperatures up to and in excess of 400°F (204°C).
Ver producto -
FM35
FM35 “fine line” masking tape uses thermally stabilized PVC backing with a rubber-based, pressure-sensitive adhesive. This tape is designed to offer a high degree of conformability, is waterproof, and solvent resistant. Operating temperature range of 40°F to 280°F (4.4°C to 138°C).
Ver producto -
FM38
Polyimide backing and silicone adhesive with Anti-Static Polymer Coating. This tape is used where low static, toughness, puncture resistance, extreme resistance to heat, and flame retardant properties are required. This product generates less than 50 volts discharge as it is being dispensed.
Ver producto -
FM71
FM71 “fine line” masking tape uses thermally stabilized PVC backing with a rubber-based, pressure-sensitive adhesive. This tape is designed to offer a high degree of conformability without excessive stretch. Will hold and cleanly remove from surfaces in the presence of 250° F (120° C) temperatures for at least 30 minutes....
Ver producto -
Gaffers Tape
Vinyl (PVC) coated cloth tape with an aggressive pressure sensitive natural rubber adhesive designed to adhere securely to a variety of surfaces. Low-gloss (matte / lusterless) finish minimizes the reflection of lighting on live stage / studio sets.
Ver producto -
Iron Grip (AC617)
Polyethylene (PE) coated cloth duct tape with an aggressive pressure-sensitive natural rubber adhesive adheres well to a wide variety of surfaces under a wide range of temperature conditions. Designed to meet demanding applications. Easy dispensing from roll.
Ver producto -
LA26
A pressure-sensitive tape designed for use in high temperature conditions. Combining the moisture, chemical, abrasion, and puncture resistance of polyester film with the machine direction strength and dimensional stability of rope-fiber paper backing. Thermosetting adhesive can withstand exposure to temperatures up to 350º F (176º C).
Ver producto